Description

WORK/PLAY
MASTERCASE SL600M
– Premium Aluminum Paneling
– Vertical Chimney Effect Layout
– Noise Reduction Technology
– Rotatable PCI Bracket Window
– Versatile Storage Bracket
– Advanced I/O Panel
– Adjustable Top Ventilation

PREMIUM ALUMINUM PANELING
The top and front of the case are clad in anodized aluminum with a smooth sand-blasted finish.

VERTICAL CHIMNEY EFFECT LAYOUT
With the 200mm fans that take in air from the bottom, hot air rises out of the case and exits out of the top in a natural direction for efficient thermal performance.

NOISE REDUCTION TECHNOLOGY
The design of the panels inhibit noise from escaping toward the individual. The 2x200mm fans move comparatively larger volumes of air than smaller fans in a lower RPM and can operate even quieter by manually controlling the fan speed slider found on the I/O panel.

ROTATABLE PCI BRACKET WINDOW
The PCI mounting window can be rotated 90 degrees. This allows the unique ability of mounting multiple graphics card(s) vertically or with more clearance from the glass side panel.
*riser cable not included.

VERSATILE STORAGE BRACKET
The SL600M has versatile brackets that can mount an SSD, HDD, a water pump, or reservoir. These brackets can be placed in multiple positions inside the case, including being placed behind the front panel and on the bottom radiator bracket.

ADVANCED I/O PANEL
A proximity sensor triggers the USB lighting for easy access in the dark. The panel will stay temporarily lit before turning off automatically. Furthermore, the I/O panel has a USB 3.1 (Gen 2) Type-C port, four additional USB ports, a PWM fan speed slider, a headset jack (audio + mic), and a dedicated microphone jack. The headset jack supports headsets that use a single plug for microphone and headphone signals.

ADJUSTABLE TOP VENTILATION
The aluminum top panel can be adjusted to 3 different positions. The panel can either stay flush with the mesh, raised, or completely removed.

Model
MasterCase SL600M

Model Number
MCM-SL600M-SGNN-S00

Colour
Silver

Materials
Body: Steel
Front Panel: Aluminum
Top Panel: Aluminum
Left Side Panel: Tempered Glass
Right Side Panel:Steel

Motherboard Support
E-ATX (support up to 12″ x 10.7″ – will limit cable management features)
ATX
Micro ATX
Mini-ITX

Expansion
Slots: 9 + 2 (Support vertical graphics card installation)

Drive Bays
5.25″: 0
Combo 3.5″/2.5″: 4
SSD: 4

I/O Panel
Power-LED Colour: White
HDD-LED Colour: White
1 x USB 3.1 Type-C
2 x USB 3.0 Type-A
2 x USB 2.0 Type-A
Audio In/Out: 1 x 3.5mm Headset Jack (audio+mic) & 1 x 3.5mm Mic Jack
Reset Switch: N/A

Fan Control
4 step slide
4 x 4-pin PWM

Cooling
Top: 3 x 120mm or 1 x 140mm/200mm
Front: N/A
Rear: N/A
Bottom: 3 x 120mm or 2 x 140mm/200mm (2 x 200mm PWM Fan included (Speed: 400~800RPM / Connector: 4Pin))

Radiator Support
Top: 120mm / 140mm / 240mm / 280mm / 360mm (maximum thickness clearance 43mm)
Front: N/A
Rear: N/A
Bottom: 120mm / 140mm / 240mm / 280mm / 360mm (maximum thickness clearance 72mm when the GFX is installed in the vertical position)

Clearance
CPU Cooler: 191mm
PSU: 200mm
GFX: 318mm

Dust Filters
Bottom

Power Supply Support
Front Top Mount
ATX

Dimensions ( L x W x H )
544 x 242 x 573mm